Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • foresee/4C
  • gutsch/4C
2 results
Show changes
Expand all Hide whitespace changes
Inline Side-by-side
Showing
with 2539 additions and 525 deletions
source_code/version2.2_windows/PSHPACK4.H 0 → 100644
View file @ 82df1085
/*++
Copyright 1995 - 1998 Microsoft Corporation
Module Name:
pshpack4.h
Abstract:
This file turns 4 byte packing of structures on. (That is, it disables
automatic alignment of structure fields.) An include file is needed
because various compilers do this in different ways. For Microsoft
compatible compilers, this files uses the push option to the pack pragma
so that the poppack.h include file can restore the previous packing
reliably.
The file poppack.h is the complement to this file.
--*/
#if ! (defined(lint) || defined(_lint) || defined(RC_INVOKED))
#if ( _MSC_VER >= 800 ) || defined(_PUSHPOP_SUPPORTED)
#pragma warning(disable:4103)
#if !(defined( MIDL_PASS )) || defined( __midl )
#pragma pack(push)
#endif
#pragma pack(4)
#else
#pragma pack(4)
#endif
#endif // ! (defined(lint) || defined(_lint) || defined(RC_INVOKED))
source_code/version2.2_windows/RICHEDIT.H 0 → 100644
View file @ 82df1085
This diff is collapsed.
source_code/version2.2_windows/WINDOWS.H 0 → 100644
View file @ 82df1085
/*++ BUILD Version: 0001 Increment this if a change has global effects
Copyright (c) 1985-1997, Microsoft Corporation
Module Name:
windows.h
Abstract:
Master include file for Windows applications.
Modified with WC_STATIC by F. Suckow 04.08.2011
--*/
#ifndef _WINDOWS_
#define _WINDOWS_
#ifndef WINVER
#define WINVER 0x0400
#else
#if defined(_WIN32_WINNT) && (WINVER < 0x0400) && (_WIN32_WINNT > 0x0400)
#error WINVER setting conflicts with _WIN32_WINNT setting
#endif
#endif
#ifndef WC_STATIC
#define WC_STATIC "Static"
#endif
#if(WINVER >= 0x0500)
#pragma message ("")
#pragma message ("NOTE: WINVER has been defined as 0x0500 or greater which enables")
#pragma message ("Windows NT 5.0 and Windows 98 features. When these headers were released,")
#pragma message ("Windows NT 5.0 beta 1 and Windows 98 beta 2.1 were the current versions.")
#pragma message ("")
#pragma message ("For this release when WINVER is defined as 0x0500 or greater, you can only")
#pragma message ("build beta or test applications. To build a retail application,")
#pragma message ("set WINVER to 0x0400 or visit http://www.microsoft.com/msdn/sdk")
#pragma message ("to see if retail Windows NT 5.0 or Windows 98 headers are available.")
#pragma message ("")
#pragma message ("See the SDK release notes for more information.")
#pragma message ("")
#endif
#ifndef _INC_WINDOWS
#define _INC_WINDOWS
#if defined (_MSC_VER) && (_MSC_VER >= 1020)
#pragma once
#endif
/* If defined, the following flags inhibit definition
* of the indicated items.
*
* NOGDICAPMASKS - CC_*, LC_*, PC_*, CP_*, TC_*, RC_
* NOVIRTUALKEYCODES - VK_*
* NOWINMESSAGES - WM_*, EM_*, LB_*, CB_*
* NOWINSTYLES - WS_*, CS_*, ES_*, LBS_*, SBS_*, CBS_*
* NOSYSMETRICS - SM_*
* NOMENUS - MF_*
* NOICONS - IDI_*
* NOKEYSTATES - MK_*
* NOSYSCOMMANDS - SC_*
* NORASTEROPS - Binary and Tertiary raster ops
* NOSHOWWINDOW - SW_*
* OEMRESOURCE - OEM Resource values
* NOATOM - Atom Manager routines
* NOCLIPBOARD - Clipboard routines
* NOCOLOR - Screen colors
* NOCTLMGR - Control and Dialog routines
* NODRAWTEXT - DrawText() and DT_*
* NOGDI - All GDI defines and routines
* NOKERNEL - All KERNEL defines and routines
* NOUSER - All USER defines and routines
* NONLS - All NLS defines and routines
* NOMB - MB_* and MessageBox()
* NOMEMMGR - GMEM_*, LMEM_*, GHND, LHND, associated routines
* NOMETAFILE - typedef METAFILEPICT
* NOMINMAX - Macros min(a,b) and max(a,b)
* NOMSG - typedef MSG and associated routines
* NOOPENFILE - OpenFile(), OemToAnsi, AnsiToOem, and OF_*
* NOSCROLL - SB_* and scrolling routines
* NOSERVICE - All Service Controller routines, SERVICE_ equates, etc.
* NOSOUND - Sound driver routines
* NOTEXTMETRIC - typedef TEXTMETRIC and associated routines
* NOWH - SetWindowsHook and WH_*
* NOWINOFFSETS - GWL_*, GCL_*, associated routines
* NOCOMM - COMM driver routines
* NOKANJI - Kanji support stuff.
* NOHELP - Help engine interface.
* NOPROFILER - Profiler interface.
* NODEFERWINDOWPOS - DeferWindowPos routines
* NOMCX - Modem Configuration Extensions
*/
#if defined(RC_INVOKED) && !defined(NOWINRES)
#include <winresrc.h>
#else
#if defined(RC_INVOKED)
/* Turn off a bunch of stuff to ensure that RC files compile OK. */
#define NOATOM
#define NOGDI
#define NOGDICAPMASKS
#define NOMETAFILE
#define NOMINMAX
#define NOMSG
#define NOOPENFILE
#define NORASTEROPS
#define NOSCROLL
#define NOSOUND
#define NOSYSMETRICS
#define NOTEXTMETRIC
#define NOWH
#define NOCOMM
#define NOKANJI
#define NOCRYPT
#define NOMCX
#endif
#if !defined(_68K_) && !defined(_MPPC_) && !defined(_PPC_) && !defined(_ALPHA_) && !defined(_MIPS_) && !defined(_X86_) && defined(_M_IX86)
#define _X86_
#endif
#if !defined(_68K_) && !defined(_MPPC_) && !defined(_PPC_) && !defined(_ALPHA_) && !defined(_X86_) && !defined(_MIPS_) && defined(_M_MRX000)
#define _MIPS_
#endif
#if !defined(_68K_) && !defined(_MPPC_) && !defined(_PPC_) && !defined(_ALPHA_) && !defined(_X86_) && !defined(_MIPS_) && defined(_M_ALPHA)
#define _ALPHA_
#endif
#if !defined(_68K_) && !defined(_MPPC_) && !defined(_PPC_) && !defined(_ALPHA_) && !defined(_X86_) && !defined(_MIPS_) && defined(_M_PPC)
#define _PPC_
#endif
#if !defined(_68K_) && !defined(_MPPC_) && !defined(_PPC_) && !defined(_ALPHA_) && !defined(_X86_) && !defined(_MIPS_) && defined(_M_M68K)
#define _68K_
#endif
#if !defined(_68K_) && !defined(_MPPC_) && !defined(_PPC_) && !defined(_ALPHA_) && !defined(_X86_) && !defined(_MIPS_) && defined(_M_MPPC)
#define _MPPC_
#endif
#ifndef _MAC
#if defined(_68K_) || defined(_MPPC_)
#define _MAC
#endif
#endif
#ifndef RC_INVOKED
#if ( _MSC_VER >= 800 )
#pragma warning(disable:4001)
#pragma warning(disable:4201)
#pragma warning(disable:4214)
#pragma warning(disable:4514)
#endif
#include <excpt.h>
#include <stdarg.h>
#endif /* RC_INVOKED */
#include <windef.h>
#include <winbase.h>
#include <wingdi.h>
#include <winuser.h>
#ifdef _MAC
DECLARE_HANDLE(HKEY);
typedef HKEY *PHKEY;
#endif
#if !defined(_MAC) || defined(_WIN32NLS)
#include <winnls.h>
#endif
#ifndef _MAC
#include <wincon.h>
#include <winver.h>
#endif
#if !defined(_MAC) || defined(_WIN32REG)
#include <winreg.h>
#endif
#ifndef _MAC
#include <winnetwk.h>
#endif
#ifndef WIN32_LEAN_AND_MEAN
#include <cderr.h>
#include <dde.h>
#include <ddeml.h>
#include <dlgs.h>
#ifndef _MAC
#include <lzexpand.h>
#include <mmsystem.h>
#include <nb30.h>
#include <rpc.h>
#endif
#include <shellapi.h>
#ifndef _MAC
#include <winperf.h>
#if(_WIN32_WINNT >= 0x0400)
#include <winsock2.h>
#include <mswsock.h>
#else
#include <winsock.h>
#endif /* _WIN32_WINNT >= 0x0400 */
#endif
#ifndef NOCRYPT
#include <wincrypt.h>
#endif
#ifndef NOGDI
#include <commdlg.h>
#ifndef _MAC
#include <winspool.h>
#ifdef INC_OLE1
#include <ole.h>
#else
#include <ole2.h>
#endif /* !INC_OLE1 */
#endif /* !MAC */
#endif /* !NOGDI */
#endif /* WIN32_LEAN_AND_MEAN */
#ifdef _MAC
#include <winwlm.h>
#endif
#ifdef INC_OLE2
#include <ole2.h>
#endif /* INC_OLE2 */
#ifndef _MAC
#ifndef NOSERVICE
#include <winsvc.h>
#endif
#if(WINVER >= 0x0400)
#ifndef NOMCX
#include <mcx.h>
#endif /* NOMCX */
#ifndef NOIME
#include <imm.h>
#endif
#endif /* WINVER >= 0x0400 */
#endif
#ifndef RC_INVOKED
#if ( _MSC_VER >= 800 )
#pragma warning(default:4001)
#pragma warning(default:4201)
#pragma warning(default:4214)
/* Leave 4514 disabled. It's a stupid warning anyway. */
#endif
#endif /* RC_INVOKED */
#endif /* RC_INVOKED */
#endif /* _INC_WINDOWS */
#endif /* _WINDOWS_ */
source_code/version2.2_windows/amod_soil.f
View file @ 82df1085
......@@ -121,7 +121,7 @@ module data_soil
! arrays of given root distribution (defined input)
real, allocatable, save, dimension(:) :: root_fr ! root fraction per soil layer
! dp_rfr ! depth of root fraction / cm
! yearly fine root loss after Rasse et al. 2001
integer :: rdepth_kind ! kind of calculation of root depth
real, allocatable, dimension(:) :: wat_left ! auxiliary variable for coh%watleft to determin annual sum of available water in soil layer boardering on root zone
......@@ -298,15 +298,15 @@ module data_soil_t
! Variables and parameters for soil temperature calculation
integer flag_surf ! calculation of soil surface temperature
! 0 - old version
! 1 - new ersion with explicit surface temperature
integer :: flag_surf = 0 ! calculation of soil surface temperature
! 0 - surface temperature equals temperature of first layer
! 1 - with explicit surface temperature
real temps_surf ! soil surface temperature
real hflux_surf ! soil heat flux at soil surface
real temps_surf ! soil surface temperature
real hflux_surf ! soil heat flux at soil surface
! model parameters
real :: C0 = 0.76, & ! Faltungskoeff.
real :: C0 = 0.76, & ! coefficients for calculation of surface temperature
C1 = 0.05, &
C2 = 0.3
......
source_code/version2.2_windows/day_ini.f
View file @ 82df1085
......@@ -50,11 +50,12 @@ if (hum .le. 0.) then
else if (hum .gt. 100.) then
hum = 100.
endif
if (press .gt. 0.) then
if (prs(i,j) .gt. 0.) then
press = prs(i,j)
else
press = 1013.
endif
rad = rd(i,j)
wind = wd(i,j)
if (wind .lt. 0.) wind = 0.5
......
source_code/version2.2_windows/initia.f
View file @ 82df1085
......@@ -118,7 +118,8 @@ SUBROUTINE INITIA
! end of declaration section
!******************************************************************************
ncl1 = 60
!ncl1 = 60
ncl1=40
allocate (zheigh(ncl1), zbhd(ncl1), zhbc(ncl1), nz(ncl1))
allocate (smaldc(ncl1), bigdc(ncl1))
print *,' '
......@@ -133,7 +134,7 @@ WRITE(*,'(A)',advance='no') ' ***Make your choice: '
READ *, data_flag
print *,' '
clwdth=2 !set diameter class-class width
clwdth=15 !set diameter class-class width
corr_la=1. !standard value for leaf area correction in stands of high sum of crown projection areas
mixed_tot_ca=0. !sum of crown projection area for mixed stands
pass = 1 !counter for number of passes through calculation loop for mixed stands
......@@ -256,7 +257,7 @@ CASE(1)
IF (datasets=='multi') THEN
select_lines=.false.
fl_num=0
if(infile=='input/hyyti_ini_0616.txt') then
ALLOCATE(ngroups(10000))
numstand= 0
......@@ -291,7 +292,6 @@ if(infile=='input/hyyti_ini_0616.txt') then
iF(baum(i).EQ.22) ngroups(nlines)%taxid=6 ! Larix
iF(baum(i).EQ.23) ngroups(nlines)%taxid=7 ! Pinus strobus
iF(baum(i).EQ.24) ngroups(nlines)%taxid=10 ! Douglasie
IF (dm(i).eq.0) dm(i) = 0.5
IF (mhoe(i).eq.0) mhoe(i) = 1.0
IF (gf(i).eq.0) gf(i) = 0.25
......@@ -310,50 +310,6 @@ if(infile=='input/hyyti_ini_0616.txt') then
3333 CONTINUE
nlines=nlines-1
WRITE(*,*) nlines,'sets of data', numstand, 'sets of stands'
ELSE
IF(select_lines) THEN
READ(listunit,*)nlines_comp
ALLOCATE(locid_comp(nlines_comp))
DO i=1,nlines_comp ! reading list of sites to be initialised
READ(listunit,*) locid_comp(i)
ENDDO ! end reading list of sites to be initialised
ENDIF ! end of reading file with sites to be selected
IF(select_lines) CLOSE(listunit)
CALL assign_DSW
CALL init_plenter_param
READ (inunit,*)nlines
ALLOCATE(ngroups(nlines))
istart=1
READ(inunit,*) ngroups(1)%locid,ngroups(1)%schicht,ngroups(1)%BRAid,ngroups(1)%alter,ngroups(1)%patchsize,ngroups(1)%mhoe,ngroups(1)%dm,ngroups(1)%volume,ngroups(1)%gf
ngroups(1)%patchsize=ngroups(1)%patchsize*10000.
ngroups(1)%baumzahl=0
ngroups(istart)%standsize=ngroups(1)%patchsize
ngroups(1)%taxid=tax_of_BRA_id(ngroups(1)%BRAid)
DO i=2,nlines
READ(inunit,*) ngroups(i)%locid,ngroups(i)%schicht,ngroups(i)%BRAid,ngroups(i)%alter,ngroups(i)%patchsize,ngroups(i)%mhoe,ngroups(i)%dm,ngroups(i)%volume,ngroups(i)%gf
WRITE(*,*) 'set no', i, 'read'
ngroups(i)%baumzahl=0
! the following line maps BRAid 770 to 779, other 'Mehlbeeren', because two
! different numbering systems existed in Brandenburg in the course of time
IF(ngroups(i)%BRAid==770) ngroups(i)%BRAid=779
ngroups(i)%patchsize=ngroups(i)%patchsize*10000.
ngroups(i)%taxid=tax_of_BRA_id(ngroups(i)%BRAid)
IF(ngroups(i)%taxid==6) ngroups(i)%taxid=3
IF(ngroups(i)%taxid==0) THEN
ELSE
ENDIF
IF(ngroups(i)%locid==ngroups(istart)%locid) THEN
ngroups(istart)%standsize=ngroups(istart)%standsize+ngroups(i)%patchsize
ngroups(i)%standsize = ngroups(istart)%standsize
ELSE
istart=i
ngroups(istart)%standsize=ngroups(i)%patchsize
fl_num=fl_num+1
ENDIF
ENDDO ! readin loop for multi data-set
ENDIF ! block for direct DSW data or brb_inv-file structure
CLOSE(inunit)
! read in file headder for description, write into ini-file
cform=1;hlp_lai=0
......@@ -571,6 +527,7 @@ if(infile=='input/hyyti_ini_0616.txt') then
! classification of single values in diameter cohorts
clwdth=1+AINT((bhdmax-bhdmin)/ncl1) !calculation of class widths
! write(4444,*) 'clwdth', clwdth, bhdmax, bhdmin, ncl1
DO i=1,ncl1
nz(i)=0
zbhd(i)=0
......@@ -771,8 +728,9 @@ CASE(6)
g=ngroups(iz)%gf !basal area/ha
gpatch=g*4. !basal area/patch
bz=ngroups(iz)%baumzahl*4. !tree numbre/patch
clwdth=dg/20.
! clwdth=dg/20.
clwdth=dg/5
! selection of uni-height curve: beech, spruce, oak calculation according to Weimann,
! other species of trees after Kuleschis (vergl. Gerold 1990)
IF (taxid==3.OR.taxid==5) THEN
......
source_code/version2.2_windows/main_4c_cons_win.f90 0 → 100644
View file @ 82df1085
!*****************************************************************!
!* *!
!* 4C (FORESEE) Simulation Model *!
!* *!
!* *!
!* Subroutines for: *!
!* - windows shell - *!
!* *!
!* contains: *!
!* main program for 4C *!
!* *!
!* Copyright (C) 1996-2018 *!
!* Potsdam Institute for Climate Impact Reserach (PIK) *!
!* Authors and contributors see AUTHOR file *!
!* This file is part of 4C and is licensed under BSD-2-Clause *!
!* See LICENSE file or under: *!
!* http://www.https://opensource.org/licenses/BSD-2-Clause *!
!* Contact: *!
!* https://gitlab.pik-potsdam.de/XXXXXXXXXXXXXXXXXXXXX *!
!* *!
!*****************************************************************!
PROGRAM foresee
USE data_simul
real time1, time2
call CPU_time (time1)
call Act_Dir(actDir)
CALL topmenu_win
call CPU_time (time2)
print *, ' 4C total run time ', time2-time1, ' sec'
END PROGRAM foresee
source_code/version2.2_windows/pik400x.bmp 0 → 100644
View file @ 82df1085
source_code/version2.2_windows/pik400x.bmp

75.1 KiB

source_code/version2.2_windows/prepsite.f
View file @ 82df1085
......@@ -165,6 +165,7 @@ do
case (8, 9, 10)
call readsoil ! reading soil parameter
IF (flag_end .gt.0) return
call readredN ! Input redN or test resp.
end select
endif
......@@ -198,7 +199,7 @@ call readlit
! Initialization of soil model with profile data
call soil_ini ! Aufruf ohne s_cn_ini
! Initialization disturbances
IF (flag_dis .eq. 1) CALL dist_ini
IF (flag_dis .eq. 1 .or. flag_dis .eq. 2) CALL dist_ini
! Initialization of stand
call prepare_stand
IF (flag_end .gt.0) return
......@@ -268,12 +269,13 @@ if (flag_eva .gt.10) call evapo_ini
subroutine readsoil ! Input of soil parameter
use data_par
use data_soil_t
use data_site
implicit none
integer :: inunit, helpnl, helpnr
integer :: inunit, helpnl, helpnr, ihelp
real helpgrw, hlong, hlat
character :: text
character(30) :: hor, boart, helpid
......@@ -283,17 +285,15 @@ if (flag_trace) write (unit_trace, '(I4,I10,A)') iday, time_cur, ' readsoil'
! Setting of flag_surf from flag_cond
select case (flag_cond)
case (0,1,2,3)
flag_surf = 0
case (10,11,12,13)
flag_surf = 1
case (0,1,2,3)
flag_surf = 0
case (20,21,22,23)
flag_surf = 2
case (10,11,12,13)
flag_surf = 1
case (30,31,32,33)
flag_surf = 3
case (30,31,32,33)
flag_surf = 3
end select
! Setting of flag_bc from flag_decomp
......@@ -479,7 +479,7 @@ IF (ex .eqv. .true.) then
if (.not.flag_mult8910) print *,' >>>FORESEE message: soil_id ', soilid(ip), ' not found'
if (.not.flag_mult8910) print *,' Check your input choice!!!'
if (help==1) call dealloc_soil
CALL error_mess(time,"soil identificator not found"//adjustl(soilid(ip))//"ip No.",real(help_ip))
CALL error_mess(time,"soil identificator not found "//adjustl(soilid(ip))//"ip No.",real(help_ip))
flag_end = 5
return
ENDIF ! ios
......@@ -535,15 +535,11 @@ IF (ex .eqv. .true.) then
endif
end do
IF (ios .ne.0) then
if (.not.flag_mult8910) print *,' >>>FORESEE message: Error during reading soil data!'
WRITE(*,'(A)',advance='no') ' Stop program (y/n)? '
read *, a
IF ( a .eq. 'y' .or. a .eq. 'Y') then
print *, ' STOP program!'
stop
endif
print *,' >>>FORESEE message: Error during reading soil data!'
print *, ' Program stopped!'
IF (help==1) call dealloc_soil
if (.not.flag_mult8910) print *,' Check your input choice!!!'
flag_end = 7
return
endif ! ios
exit
endif
......@@ -556,7 +552,7 @@ IF (ex .eqv. .true.) then
print *,' Check your input choice!!!'
endif
if (help==1) call dealloc_soil
CALL error_mess(time,"soil identificator not found"//adjustl(soilid(ip))//"ip No.",real(help_ip))
CALL error_mess(time,"soil identificator not found "//adjustl(soilid(ip))//"ip No.",real(help_ip))
flag_end = 5
return
ENDIF ! ios
......@@ -915,7 +911,7 @@ if (.not.flag_mult8910 .or. (flag_mult8910 .and. anh .eq. "1") .or. (flag_mult89
WRITE(unit_ctr,'(A66,I4)') 'Time step for photosynthesis calculations (days) - ns_pro: ',ns_pro
WRITE(unit_ctr,'(A66,I4)') 'Mortality (0-OFF,1-ON stress, 2- ON stress+intr) - flag_mort: ',flag_mort
WRITE(unit_ctr,'(A66,I4)') 'Regeneration (0-OFF,1-ON, 2-weekly growth of seedl.) - flag_reg: ',flag_reg
WRITE(unit_ctr,'(A66,I4)') 'use FORSKA for regeneration (0-OFF,1-ON) - flag_forska: ',flag_forska
WRITE(unit_ctr,'(A66,I4)') 'use FORSKA for regeneration (0-OFF,1-ON) - flag_forska: ',flag_lambda
WRITE(unit_ctr,'(A66,I4)') 'Stand initialization (0-no,1-from *.ini,2-generate) - flag_stand: ',flag_stand
WRITE(unit_ctr,'(A66,I4)') 'Ground vegetation initialization (0-no,1-generate) - flag_sveg: ',flag_sveg
WRITE(unit_ctr,'(A66,I4)') 'Stand management (0-no,1-yes, 2 - seed once) - flag_mg: ',flag_mg
......@@ -1179,22 +1175,17 @@ real hNO, hNH
if (flag_trace) write (unit_trace, '(I4,I10,A)') iday, time_cur, ' readdepo'
if (.not.allocated(NOd)) allocate (NOd (1:366,1:year))
if (.not.allocated(NHd)) allocate (NHd (1:366, 1:year))
! for areal usage standard/constant deposition is set as concentration:
if (flag_multi .eq. 8 .or. flag_mult910) then
flag_depo = 2
if (.not.allocated(NOd)) then
allocate (NOd (1:366,1:year))
NOd = NOdep(ip) ! concentration mg/l
endif
if (.not.allocated(NHd)) then
allocate (NHd (1:366,1:year))
NHd = NHdep(ip) ! concentration mg/l
endif
NOd = NOdep(ip) ! concentration mg/l
NHd = NHdep(ip) ! concentration mg/l
return
endif
if (.not.allocated(NOd)) allocate (NOd (1:366,1:year))
if (.not.allocated(NHd)) allocate (NHd (1:366, 1:year))
NOd = 0.
NHd = 0.
......@@ -1427,6 +1418,7 @@ END subroutine readdepo
SUBROUTINE readredN
use data_out
use data_site
use data_species
use data_stand
use data_simul
......
source_code/version2.2_windows/script1.aps 0 → 100644
View file @ 82df1085
File added
source_code/version2.2_windows/script1.rc 0 → 100644
View file @ 82df1085
This diff is collapsed.
source_code/version2.2_windows/simul.f
View file @ 82df1085
......@@ -32,7 +32,6 @@ character a
character(8) actdate
character(10) acttime, helpsim, text1, text2
real time1, time2, time3
logical lhelp
unit_err=getunit()
if(flag_multi.eq.5) dirout = './'
......@@ -46,20 +45,6 @@ write (unit_trace, '(I4,I10,A)') iday, time_cur, ' sim_control'
! check daily output
if (year > 5 .and. flag_dayout .ge. 1) then
lhelp = .true.
do i = 1,outd_n
if (outd(i)%out_flag .eq. flag_dayout) then
select CASE (outd(i)%kind_name)
CASE ('day_short')
lhelp = .false.
end select
endif
enddo
if (lhelp) then
write(*,*) ' Warning: Your choice of daily output is ON with a simulation time of'
write(*,'(I6,A,I8,A)') year,' years. This option will create ',365*year,' data records per file!'
write(*,'(A)',advance='no') ' Do you really want do use daily output (y/n)? '
......@@ -67,7 +52,6 @@ if (year > 5 .and. flag_dayout .ge. 1) then
IF (a .eq. 'n' .or. a .eq. 'N') then
flag_dayout = 0
ENDIF
endif ! lhelp
ENDIF
! open file ycomp (yearly compressed output (multi run))
......@@ -136,10 +120,14 @@ time3 = 0.
case (5)
print*,ip, ' stop in readsoil, soil ID not found ', adjustl(soilid(ip))
case (6)
write(*,'(A,I5)') ' >>>foresee message: stop in read_cli - no climate data for year ',time_b
write(*,'(A,I5)') ' >>>foresee message: stop in read_cli, no climate data for year ',time_b
call finish_simul
stop
case (7)
print*,ip, ' stop in readsoil, error during reading soil data ', adjustl(soilid(ip))
call finish_simul
stop
case default
case default
print*,ip, 'flag_end = ', flag_end
end select
......@@ -228,7 +216,7 @@ if (flag_trace) write (unit_trace, '(I4,I10,A)') iday, time_cur, ' simulation_4C
DO time = 1, year
iday = 1
! Update population variable for new year if population is changed through interventions
if (flag_standup .gt. 0 .or. flag_dis==1) then
if (flag_standup .gt. 0 .or. flag_dis==1 .or. flag_dis==1) then
call stand_balance
call standup
flag_standup = 0
......@@ -239,7 +227,10 @@ if (flag_trace) write (unit_trace, '(I4,I10,A)') iday, time_cur, ' simulation_4C
! read or create Redn for areal application
IF (time.EQ.1 .and. flag_redn) CALL RedN_ini
IF (flag_dis .eq. 1) CALL dis_manag
IF (flag_dis .eq. 1 .or. flag_dis .eq. 2) then
CALL dis_manag
endif
! simulation of processes with subannual resolution (fluxes and soil)
CALL stand_daily
......
source_code/version2.2_windows/soil_tem.f
View file @ 82df1085
......@@ -453,12 +453,6 @@ CASE (0, 10, 20, 30, 40) ! de Vries
tcond0 = numera/denom * 86400. ! s --> day
CASE(2, 12, 22, 32, 42) ! sum like resistor; wie Widerstaende addieren
tcond2 = water%vf / water%tc + quarz%vf / quarz%tc + clay%vf / clay%tc + &
silt%vf / silt%tc + humus%vf / humus%tc + air%vf / air%tc + stone%vf / stone%tc + ice%vf / ice%tc
tcond2 = 86400. / tcond2
CASE(3, 13, 23, 33, 43) ! Campbell
vfm = clay%vf + silt%vf + stone%vf
vfs = vfm + quarz%vf + humus%vf
......@@ -504,13 +498,6 @@ CASE (1, 11, 21, 31, 41) ! Neusypina
hcapi = hcap1
tcondi = tcond1
CASE (2, 12, 22, 32, 42) ! sum like resitors; Widerstnde addieren
if ((tcond2 .gt. 8000.) .or. (tcond2 .le. 0.)) then
continue
endif
hcapi = hcap0
tcondi = tcond2
CASE (3, 13, 23, 33, 43) ! Campbell
hcapi = hcap0
tcondi = tcond3
......
source_code/version2.2_windows/sr_forska.f deleted 100755 → 0
View file @ 056d9307
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!
! Subroutines used only with flag flag_forska
!
! cetbl_4c
! CGTSPE_4c
! CLIMEF_4c
! gsdr_cal
! tmp_mean
! therm
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SUBROUTINE CETBL_4c
use data_effect
use data_taxa
use data_simul
use data_stand
! function declarations
REAL RAND
! local variables
real :: PMX
INTEGER :: I,J,K
integer,dimension(17) :: nsap= 0
real,dimension(17) :: amdest = 0., &
amdest1 = 0.
if (flag_light.eq.1.or.flag_light.eq.2) then
PMX= Vstruct(lowest_layer)%Irel
else if (flag_light.eq.3.OR.flag_light.EQ.4) then
PMX = Bgpool(lowest_layer+1)
end if
! amend the EST for climate according to the climate multipliers
do i=1,17
AMDEST(I)=EST(I)*GDDMX(I)*DRMX(I)*TCMX(I)*TWMX(I)*PMX &
*XTFTMX(I)*TWARMX(I)
AMDEST1(I)=EST(I)*AMIN1(GDDMX(I),DRMX(I),TCMX(I),TWMX(I), &
PMX,XTFTMX(I),TWARMX(I))
IF(GSC(I).EQ.0.0)GOTO 301
301 CONTINUE
end do
RETURN
END subroutine cetbl_4c
SUBROUTINE CGTSPE_4c
! input of species data for regeneration
! reads species parameters
use data_simul
use data_taxa
! local variables
INTEGER:: I,J,K,nowunit,ntax
! reads number of taxa (NTAX)
nowunit=getunit()
open(unit=nowunit,file= '/data/safe/4C/4C_input/par/param_4c.dat', status='old')
READ(nowunit,*) NTAX
! reads for each taxon:
! NAM(I): name (8 characters)
! HMX(I): max height (m)
! HDS(I): initial slope of diameter vs height (m/cm)
! hgro(I): maximum height growth per year (m)
! ALP(I): half-saturation point (umol/m**2/s)
! LCP(I): compensation point (umol/m**2/s)
! GSC(I): growth constant (cm**2/m/yr)
! EST(I): sapling establishment rate (/ha/yr)
! TDI(I): threshold relative growth efficiency for increased mortality
! UMN(I): intrinsic mortality rate (/yr)
! UMX(I): suppressed mortality rate (/yr)
! SPR(I): number of sprouts per tree (0.0 or greater)
! SMN(I): minimum diameter for sprouting (cm)
! LAC(I): initial leaf area/D2 ratio (m**2/cm**2)
! LAF(I): sapwood turnover rate (/yr)
! BCF(I): stemwood biomass conversion factor (kg/cm**2/m)
! R(I): volumetric sapwood maintenance cost (/yr)
! Q10(I): rate of increase of respiration
! TMIN(I): minimum temperature for assimilation
! TMAX(I): maximum temperature for assimilation
! CCP(I): species compensation point
! DRI(I): maximum tolerated drought-index
!MINGDD(I): minimum growing degree-days
! MINTC(I): minimum temperature of coldest month (degrees C)
! MAXTC(I): maximum temperature of coldest month (degrees C)
! MINTW(I): minimum temperature of warmest month (degrees C)
! DORE(I): deciduous or evergreen 0=deciduous,1=evergreen
! ntc(I): nitrogen tolerance class (1,2,3,4,5)
! e1(I): Parameter smin of haadee height growth function
! e2(I): Second Parameter of haadee height growth function
! geff(I): growth efficiency factor of shaded trees
DO I=1,ntax
READ(nowunit,1) NAM(I)
READ(nowunit,*) HMX(I),HDS(I),hgro(I),ALP(I),LCP(I),GSC(I), &
EST(I),TDI(I),UMN(I),UMX(I),SPR(I),SMN(I),LAC(I),LAF(I),BCF(I), &
R(I),Q10(I),TMIN(I),TMAX(I),CCP(I),DRI(I),MINGDD(I),MINTC(I), &
MAXTC(I),MINTW(I),DORE(I),ntc(I)
IF(SPR(I).EQ.0)SMN(I)=0.0
DRI(I)=DRI(I)+0.3
end do
RETURN
! format statements
1 FORMAT(A8)
END subroutine cgtspe_4c
SUBROUTINE CLIMEF_4c
use data_taxa
use data_effect
use data_simul
! computes the growth multipliers.
! checks to see if GDD, temp coldest month below minimum for species
! if so multipliers = 0 else equals 1.
! computes drought effect multipliers as per ICP
! sets max.temp of coldest month multiplier to 0 or 1 for ESTBL routine
! checks if warmest month exceeds species limit
! averages light intensity (INS) over time step.
! local parameters
INTEGER :: I,J,K
REAL ::TOTGDD= 0, &
TGSDRT=0., &
TM4DRT=0.
real,dimension(17) :: tottft=0.
! gives growth multiplier for each species to be applied in subroutine
! TVXT or ETBL - growing degree days, growing/-4 drought index, temps.
TOTGDD=GDD(time)
TGSDRT=GSDRI(time)
TM4DRT=M4DRI(time)
! totals and then averages species specific multipliers etc. over timestep
! that is sapres, mutmx, tftmx
do i=1,17
xtftmx(i) = tftmx(i,time)
end do
! set multipliers to 1 before checking on environment
do i=1,17
GDDMX(I)=1.0
TWARMX(I)=1.0
TCMX(I)=1.0
TWMX(I)=1.0
TWARMX(I)=1.0
! check to see is a deciduous species
IF(DORE(I).EQ.0)THEN
DRMX(I)=1-((TGSDRT/DRI(I))**2)
IF(DRMX(I).LT.0.0)DRMX(I)=0.0
ELSE
! must be an evergreen
DRMX(I)=1-((TM4DRT/DRI(I))**2)
IF(DRMX(I).LT.0.0)DRMX(I)=0.0
ENDIF
! check if environment exceeds species limits - step functions
! if so set multiplier to zero
IF(TOTGDD.LT.MINGDD(I))GDDMX(I)=0.0
IF(TCOLD.LT.MINTC(I))TCMX(I)=0.0
IF(TCOLD.GT.MAXTC(I))TWMX(I)=0.0
IF(TWARM.LT.MINTW(I))TWARMX(I)=0.0
! write out to screen and forcli.out multipliers for each species
! keep these commented as they use a lot of paper <--M.B was ist damit gemeint? ist das relevant fr den nutzer.
end do
do i=1,17
end do
end subroutine climef_4c
SUBROUTINE gsdr_cal
! calculation of gsdri and m4dri for FORSKA regeneration
use data_climate
use data_effect
use data_simul
use data_evapo
if(tp(iday,time).ge.-4.) then
foudpt = foudpt + pet
foudae = foudae + aet
end if
if(tp(iday,time).ge.4.) then
tgsdpt = tgsdpt + pet
tgsdae = tgsdae + aet
end if
if(iday.eq. recs(time)) then
gsdri(time) = (tgsdpt-tgsdae)/tgsdpt
m4dri(time) = (foudpt-foudae)/foudpt
end if
END SUBROUTINE gsdr_cal
SUBROUTINE tmp_mean
! calculation of environmental variables twarm, tcold and long-term monthly
! mean of temperature
USE data_effect
USE data_climate
USE data_simul
real,dimension(12) :: tmph = 0.
integer :: i,l,m,dayc
allocate( tpmean(12))
allocate (gdd(year))
allocate (tftmx(17,year))
monrec=(/31,28,31,30,31,30,31,31,30,31,30,31/)
tpmean = 0
if (recs(time).eq.366) then
monrec(2)=29
else
monrec(2)=28
endif
do k = 1, year
! call calculation of env. variables
call therm(k)
dayc = 1
do l= 1,12
tmph(l) = 0.
do m=1,monrec(l)
tmph(l) = tmph(l) + tp( dayc,k)
dayc = dayc + 1
end do
tmph(l) = tmph(l)/monrec(l)
tpmean(l) = tpmean(l) + tmph(l)
end do
end do
do l=1,12
tpmean(l) = tpmean(l)/year
end do
! work out which is temperature of coldest month
! and warmest month for year
tcold = 50.0
twarm = -50.0
do k=1,12
if(tpmean(k).lt.tcold) tcold = tpmean(k)
if(tpmean(k).gt.twarm) twarm = tpmean(k)
end do
END SUBROUTINE tmp_mean
SUBROUTINE therm(ktime)
! therm - calculation of environmental variables (annual and species specific)
! gdd - growing degress day
! tftmx - thermal multiplier - species specific
use data_climate
use data_simul
use data_effect
use data_taxa
implicit none
! local variables
integer :: j,k,m4day,gdday1,ktime
real,dimension(17) :: tft,tresft
gdd(ktime) = 0.
m4day=0
gdday1=0
do j=1,17
tft(j)=0.0
tresft(j)=0.0
end do
! calculate ft values for each day of the year
! for each species upto number of taxa
do k=1,17
do j=1,recs(ktime)
! add up mutmx multiplier
tresft(k) = tresft(k)+(q10(k)**((tp(j,ktime) - tref)*0.1))
if(k.eq.1) then
if (tp(j,ktime).ge.tref) gdd(ktime) = gdd(ktime) + (tp(j,ktime)-tref)
end if
! first check to see if deciduous or not
if(dore(k).eq.0)then
! totalling daily deciduous multipliers for growing season only
if(tp(j,ktime).ge.5.0) then
tft(k) = tft(k)+(4*(tp(j,ktime)-tmin(k))*(tmax(k)-tp(j,ktime))/(tmin(k)-tmax(k))**2)
endif
else
! must be evergreen so produce daily values
! do not allow below zero
! checks for temperature greater than -4 oC for evergreen species
if(tp(j,ktime).ge.-4.0)then
tft(k)=tft(k)+(4*((tp(j,ktime)-tmin(k))*(tmax(k)-tp(j,ktime))) &
/(tmin(k)-tmax(k))**2)
endif
endif
if(tft(k).lt.0.0)tft(k)=0.0
end do
end do
do j=1,recs(ktime)
if(tp(j,ktime).ge.5.0) then
gdday1=gdday1+1
end if
if(tp(j,ktime).ge.-4.0) then
m4day=m4day+1
end if
end do
do k=1,17
if(dore(k).eq.0) then
tftmx(k,ktime) = tft(k)/gdday1
else
tftmx(k,ktime) = tft(k)/m4day
end if
end do
END SUBROUTINE therm
source_code/version2.2_windows/stand_bal.f
View file @ 82df1085
......@@ -104,7 +104,12 @@ do
sumbio = sumbio + ntr * zeig%coh%totBio
sumNPP = sumNPP + ntr * zeig%coh%NPP
Ndem = Ndem + ntr * zeig%coh%Ndemc_c
autresp = autresp + ntr * zeig%coh%maintres
select case (flag_dis)
case (0,1)
autresp = autresp + ntr * zeig%coh%maintres
case (2)
autresp = autresp + ntr * (zeig%coh%maintres+zeig%coh%biocost_all)
end select
totfol = totfol + ntr * zeig%coh%x_fol
totsap = totsap + ntr * zeig%coh%x_sap
totfrt = totfrt + ntr * zeig%coh%x_frt
......@@ -498,10 +503,6 @@ svar%frt = 0.
END SELECT
Enddo
IF(spar(spec_new)%phmodel==4) THEN
svar(spec_new)%daybb = svar(spec_new)%ext_daybb
ELSE
......@@ -543,7 +544,7 @@ do i=1,nspecies
svar(i)%mean_diam = svar(i)%mean_diam / ntr
svar(i)%mean_jrb = svar(i)%mean_jrb / ntr
svar(i)%basal_area = pi*ntr*(svar(i)%med_diam*svar(i)%med_diam/40000)*10000/kpatchsize
svar(i)%basal_area = pi*(ntr-helpdiam(i))*(svar(i)%med_diam*svar(i)%med_diam/40000)*10000/kpatchsize
else
svar(i)%sum_ntreea = 0.
endif
......@@ -1083,8 +1084,14 @@ IMPLICIT NONE
DO
IF(.not.associated(zeig)) exit
if (zeig%coh%species.ne.nspec_tree+2) then ! exclude mistletoe from senescence
zeig%coh%sfol = spar(zeig%coh%species)%psf * zeig%coh%x_fol
zeig%coh%sfrt = spar(zeig%coh%species)%psr * zeig%coh%x_frt
select case (flag_dis)
! case (1,2)
! zeig%coh%sfol = spar(zeig%coh%species)%psf * zeig%coh%x_fol + zeig%coh%x_fol_loss
! zeig%coh%sfrt = spar(zeig%coh%species)%psr * zeig%coh%x_frt + zeig%coh%x_frt_loss
case (0,1,2)
zeig%coh%sfol = spar(zeig%coh%species)%psf * zeig%coh%x_fol
zeig%coh%sfrt = spar(zeig%coh%species)%psr * zeig%coh%x_frt
end select
IF (zeig%coh%height.ge.thr_height .and.zeig%coh%species.LE. nspec_tree) THEN
zeig%coh%ssap = spar(zeig%coh%species)%pss * zeig%coh%x_sap
ELSE
......
source_code/version2.2_windows/win_appl_path.f90 0 → 100644
View file @ 82df1085
!*****************************************************************!
!* *!
!* 4C (FORESEE) Simulation Model *!
!* *!
!* Subroutines for: *!
!* - windows shell - *!
!* *!
!* contains: *!
!* Act_Dir *!
!* winPath *!
!* dealofile *!
!* fullPath *!
!* *!
!* Copyright (C) 1996-2018 *!
!* Potsdam Institute for Climate Impact Reserach (PIK) *!
!* Authors and contributors see AUTHOR file *!
!* This file is part of 4C and is licensed under BSD-2-Clause *!
!* See LICENSE file or under: *!
!* http://www.https://opensource.org/licenses/BSD-2-Clause *!
!* Contact: *!
!* https://gitlab.pik-potsdam.de/XXXXXXXXXXXXXXXXXXXXX *!
!* *!
!*****************************************************************!
SUBROUTINE Act_Dir (dir)
! Program to demonstrate GETDRIVEDIRQQ
use IFPORT
!USE DFLIB ! In case QuickWin is used
CHARACTER(150) dir
INTEGER(4) length
! Get current directory
dir = FILE$CURDRIVE
length = GETDRIVEDIRQQ(dir)
IF (length .GT. 0) THEN
WRITE (*,*) 'Current directory is: '
WRITE (*,*) dir
ELSE
WRITE (*,*) 'Failed to get current directory'
END IF
END SUBROUTINE Act_Dir
!**********************************************************
subroutine winPath()
use data_mess
use data_simul
implicit none
integer ind, i
! set full path for the files
ind = index(actDir, '\', .TRUE.)
! go to ..
if ( 'input' == trim(actDir(ind+1:ind+5)) ) then
dirout = trim(actDir(1:ind))//'output\'
! stay in the directory
else
dirout = trim(actdir)//'\output\'
endif
do i = 1,site_nr
call fullPath( sitefile(i) , actDir)
call fullPath( treefile(i) , actDir)
end do
if (.not.flag_mult910) then
do i = 1,site_nr
call fullPath( specfile(i) , actDir)
call fullPath( climfile(i) , actDir)
call fullPath( valfile(i) , actDir)
call fullPath( manfile(i) , actDir)
call fullPath( depofile(i) , actDir)
call fullPath( redfile(i) , actDir)
call fullPath( litfile(i) , actDir)
! till the wpm files is set
wpmfile(i) = 'dummy.wpm'
call fullPath( wpmfile(i) , actDir)
end do
else
call fullPath( specfile(1) , actDir)
call fullPath( manfile(1) , actDir)
call fullPath( depofile(1) , actDir)
call fullPath( redfile(1) , actDir)
call fullPath( litfile(1) , actDir)
endif
if (allocated(mesfile)) call fullPath( mesfile(1) , actDir)
end subroutine winPath
!**************************************************************
SUBROUTINE deallofile
use data_simul
implicit none
if ( allocated(site_name) ) deallocate(site_name)
if ( allocated(climfile) ) deallocate(climfile)
if ( allocated(sitefile) ) deallocate(sitefile)
if ( allocated(valfile) ) deallocate(valfile)
if ( allocated(treefile) ) deallocate(treefile)
if ( allocated(wpmfile) ) deallocate(wpmfile)
if ( allocated(standid) ) deallocate(standid)
if ( allocated(manfile) ) deallocate(manfile)
if ( allocated(depofile) ) deallocate(depofile)
if ( allocated(redfile) ) deallocate(redfile)
if ( allocated(litfile) ) deallocate(litfile)
if ( allocated(specfile) ) deallocate(specfile)
site_nr = 1
end subroutine deallofile
!**************************************************************
! changes "input\..." filename into absolute path filename
subroutine fullPath(filename, dir)
character(150) dir, filename
integer ind
if ('input' == filename(1:5)) then
! Problem: input/input
ind = index(dir, '\', .TRUE.)
if ( 'input' == trim(dir(ind+1:ind+5)) ) then
ind = index(filename, '/', .TRUE.)
filename = trim(dir)//trim(filename(ind:))
else
filename = trim(dir)//'\'//trim(filename)
end if
end if
end subroutine fullPath
source_code/version2.2_windows/win_openfile.f90 0 → 100644
View file @ 82df1085
! ********************************************************************
! * *
! * Copyright 2000 Compaq Computer Corporation *
! * *
! * COMPAQ Registered in U.S. Patent and Trademark Office. *
! * *
! * Confidential computer software. Valid license from Compaq or *
! * authorized sublicensor required for possession, use or copying. *
! * Consistent with FAR 12.211 and 12.212, Commercial Computer *
! * Software, Computer Software Documentation, and Technical Data *
! * for Commercial Items are licensed to the U.S. Government under *
! * vendor's standard commercial license. *
! * *
! ********************************************************************
!
!DEC$ IF .NOT. DEFINED (COMDLG32_ )
!DEC$ DEFINE COMDLG32_
!
!
!
!************This version of comdlg32 contains new items******************
! Whether new interfaces for routines in COMDLG32.LIB extracted from
! VC++6 header files are included is controlled by a statement with the
! following format towards the end of this file.
!
!IF .NOT. DEFINED(__DO_NOT_INCLUDE_VC6_ITEMS)
!
!Unless the inclusion is explicitly turned off by defining the
!above symbol, the items will be included.
!
module comdlg32
use dfwinty
!DEC$OBJCOMMENT LIB:"COMDLG32.LIB"
!
! *****COMMDLG******
interface !lib=comdlg32.lib
logical(4) function GetOpenFileName (dummy )
!DEC$ ATTRIBUTES DEFAULT :: GetOpenFileName
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_GetOpenFileNameA@4' :: GetOpenFileName
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'GetOpenFileNameA' :: GetOpenFileName
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: dummy
use dfwinty
type(T_OPENFILENAME) dummy
end function GetOpenFileName
end interface
interface !lib=comdlg32.lib
logical(4) function GetSaveFileName (dummy )
!DEC$ ATTRIBUTES DEFAULT :: GetSaveFileName
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_GetSaveFileNameA@4' :: GetSaveFileName
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'GetSaveFileNameA' :: GetSaveFileName
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: dummy
use dfwinty
type(T_OPENFILENAME) dummy
end function GetSaveFileName
end interface
interface !lib=comdlg32.lib
integer*2 function GetFileTitle (dummya ,dummyb ,dummyc )
!DEC$ ATTRIBUTES DEFAULT :: GetFileTitle
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_GetFileTitleA@12' :: GetFileTitle
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'GetFileTitleA' :: GetFileTitle
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: dummya
!DEC$ ATTRIBUTES REFERENCE :: dummyb
character*(*) dummya
character*(*) dummyb
integer*2 dummyc
end function GetFileTitle
end interface
interface !lib=comdlg32.lib
logical(4) function ChooseColor (dummy )
!DEC$ ATTRIBUTES DEFAULT :: ChooseColor
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_ChooseColorA@4' :: ChooseColor
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'ChooseColorA' :: ChooseColor
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: dummy
use dfwinty
type(T_CHOOSECOLOR) dummy
end function ChooseColor
end interface
interface !lib=comdlg32.lib
integer*4 function FindText (dummy )
!DEC$ ATTRIBUTES DEFAULT :: FindText
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_FindTextA@4' :: FindText
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'FindTextA' :: FindText
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: dummy
use dfwinty
type(T_FINDREPLACE) dummy
end function FindText
end interface
interface !lib=comdlg32.lib
integer*4 function ReplaceText (dummy )
!DEC$ ATTRIBUTES DEFAULT :: ReplaceText
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_ReplaceTextA@4' :: ReplaceText
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'ReplaceTextA' :: ReplaceText
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: dummy
use dfwinty
type(T_FINDREPLACE) dummy
end function ReplaceText
end interface
interface !lib=comdlg32.lib
logical(4) function ChooseFont (dummy )
!DEC$ ATTRIBUTES DEFAULT :: ChooseFont
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_ChooseFontA@4' :: ChooseFont
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'ChooseFontA' :: ChooseFont
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: dummy
use dfwinty
type(T_CHOOSEFONT) dummy
end function ChooseFont
end interface
interface !lib=comdlg32.lib
logical(4) function PrintDlg (dummy)
!DEC$ ATTRIBUTES DEFAULT :: PrintDlg
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_PrintDlgA@4' :: PrintDlg
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'PrintDlgA' :: PrintDlg
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: dummy
use dfwinty
type(T_PRINTDLG) dummy
end function PrintDlg
end interface
interface !lib=comdlg32.lib
integer*4 function CommDlgExtendedError ()
!DEC$ ATTRIBUTES DEFAULT :: CommDlgExtendedError
!DEC$ IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_CommDlgExtendedError@0' :: CommDlgExtendedError
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS: 'CommDlgExtendedError' :: CommDlgExtendedError
!DEC$ ENDIF
end function CommDlgExtendedError
end interface
!
!DEC$ IF .NOT. DEFINED(__DO_NOT_INCLUDE_VC6_ITEMS)
!
INTERFACE
FUNCTION PageSetupDlg( &
arg1)
USE DFWINTY
integer(BOOL) :: PageSetupDlg ! BOOL
!DEC$ ATTRIBUTES DEFAULT :: PageSetupDlg
!DEC$IF DEFINED(_X86_)
!DEC$ ATTRIBUTES STDCALL, ALIAS:'_PageSetupDlgA@4' :: PageSetupDlg
!DEC$ ELSE
!DEC$ ATTRIBUTES STDCALL, ALIAS:'PageSetupDlgA' :: PageSetupDlg
!DEC$ ENDIF
!DEC$ ATTRIBUTES REFERENCE :: arg1
TYPE (T_PAGESETUPDLGA) arg1 ! LPPAGESETUPDLGA arg1
END FUNCTION
END INTERFACE
!
!DEC$ ENDIF ! /* __DO_NOT_INCLUDE_VC6_ITEMS */
!
end module comdlg32
!
!DEC$ ENDIF ! /* COMDLG32_ */
source_code/version2.2_windows/wpm_wood_proc.f
View file @ 82df1085
......@@ -154,7 +154,7 @@ integer act_spec, act_year, set_year
! calculate emission from harvesting process
emission_har (management_years(i)) = summe * sub_par(1)
write (9999,*) emission_har(management_years(i)), management_years(i)
! write (9999,*) emission_har(management_years(i)), management_years(i)
end do
end subroutine calculate_product_lines
......
source_code/version_2.3_windows/4C_dialogs.fd 0 → 100644
View file @ 82df1085
!MS$FREEFORM
! Microsoft Developer Studio generated include file.
! Used by script1.rc
!
integer, parameter :: IDD_4C = 101
integer, parameter :: IDD_4C_ctr = 102
integer, parameter :: IDD_4C_flags = 109
integer, parameter :: IDD_4C_files = 111
integer, parameter :: IDB_BITMAP3 = 115
integer, parameter :: IDD_4C_out = 116
integer, parameter :: IDD_4C_yearly = 118
integer, parameter :: IDD_4C_daily = 119
integer, parameter :: IDD_4C_coh_yearly = 120
integer, parameter :: IDD_4C_coh_daily = 121
integer, parameter :: IDD_default_dir = 122
integer, parameter :: IDD_4C_default_dir = 122
integer, parameter :: IDD_4C_main = 123
integer, parameter :: IDD_4C_ids = 126
integer, parameter :: IDB_BITMAP1 = 131
integer, parameter :: IDC_STATIC_Control = 1005
integer, parameter :: IDC_STATIC_4C = 1017
integer, parameter :: IDC_COMBO_runv = 1019
integer, parameter :: IDC_RADIO_ctrfile = 1020
integer, parameter :: IDC_COMBO_runv3 = 1020
integer, parameter :: IDC_RADIO_ctredit = 1024
integer, parameter :: IDC_STATIC_simul = 1034
integer, parameter :: IDC_STATIC_runv = 1036
integer, parameter :: IDC_STATIC_runnr = 1037
integer, parameter :: IDC_STATIC_runv3 = 1038
integer, parameter :: IDC_EDIT_runnr = 1044
integer, parameter :: IDC_STATIC_runo = 1046
integer, parameter :: IDC_STATIC_runo3 = 1047
integer, parameter :: IDC_EDIT_yearn = 1048
integer, parameter :: IDC_EDIT_start = 1049
integer, parameter :: IDC_STATIC_yearn = 1050
integer, parameter :: IDC_STATIC_start = 1051
integer, parameter :: IDC_EDIT_patch = 1052
integer, parameter :: IDC_STATIC_patch = 1053
integer, parameter :: IDC_STATIC_model = 1055
integer, parameter :: IDC_EDIT_thickf = 1056
integer, parameter :: IDC_EDIT_timeph = 1057
integer, parameter :: IDC_STATIC_thickf = 1058
integer, parameter :: IDC_STATIC_timeph = 1059
integer, parameter :: IDC_STATIC_mort = 1060
integer, parameter :: IDC_STATIC_reg = 1061
integer, parameter :: IDC_STATIC_forska = 1062
integer, parameter :: IDC_COMBO_mort = 1063
integer, parameter :: IDC_COMBO_reg = 1064
integer, parameter :: IDC_COMBO_forska = 1065
integer, parameter :: IDC_STATIC_stand = 1066
integer, parameter :: IDC_STATIC_sveg = 1067
integer, parameter :: IDC_STATIC_mg = 1068
integer, parameter :: IDC_STATIC_dis = 1069
integer, parameter :: IDC_STATIC_light = 1070
integer, parameter :: IDC_STATIC_folhei = 1071
integer, parameter :: IDC_COMBO_stand = 1072
integer, parameter :: IDC_COMBO_sveg = 1073
integer, parameter :: IDC_COMBO_mg = 1074
integer, parameter :: IDC_COMBO_dis = 1075
integer, parameter :: IDC_COMBO_light = 1076
integer, parameter :: IDC_COMBO_folhei = 1077
integer, parameter :: IDC_COMBO_volfunc = 1078
integer, parameter :: IDC_STATIC_volfunc = 1079
integer, parameter :: IDC_STATIC_resp = 1080
integer, parameter :: IDC_STATIC_limi = 1081
integer, parameter :: IDC_STATIC_decomp = 1082
integer, parameter :: IDC_STATIC_sign = 1083
integer, parameter :: IDC_STATIC_wred = 1084
integer, parameter :: IDC_STATIC_wurz = 1085
integer, parameter :: IDC_STATIC_cond = 1086
integer, parameter :: IDC_COMBO_resp = 1088
integer, parameter :: IDC_COMBO_limi = 1089
integer, parameter :: IDC_COMBO_decomp = 1090
integer, parameter :: IDC_COMBO_sign = 1091
integer, parameter :: IDC_COMBO_wred = 1092
integer, parameter :: IDC_COMBO_wurz = 1093
integer, parameter :: IDC_COMBO_cond = 1094
integer, parameter :: IDC_COMBO_int = 1095
integer, parameter :: IDC_COMBO_eva = 1096
integer, parameter :: IDC_STATIC_int = 1097
integer, parameter :: IDC_STATIC_eva = 1098
integer, parameter :: IDC_STATIC_sort = 1099
integer, parameter :: IDC_STATIC_wpm = 1100
integer, parameter :: IDC_COMBO_CO2 = 1101
integer, parameter :: IDC_STATIC_stat = 1102
integer, parameter :: IDC_COMBO_sort = 1103
integer, parameter :: IDC_COMBO_wpm = 1104
integer, parameter :: IDC_COMBO_stat = 1105
integer, parameter :: IDC_STATIC_files = 1108
integer, parameter :: IDC_STATIC_specpar = 1109
integer, parameter :: IDC_EDIT_specpar = 1110
integer, parameter :: IDC_BUTTON_specpar = 1111
integer, parameter :: IDC_BUTTON_ini = 1112
integer, parameter :: IDC_BUTTON_sop = 1113
integer, parameter :: IDC_STATIC_dir1 = 1114
integer, parameter :: IDC_STATIC_dirin = 1114
integer, parameter :: IDC_BUTTON_soi = 1115
integer, parameter :: IDC_STATIC_dirout = 1115
integer, parameter :: IDC_STATIC_soi = 1116
integer, parameter :: IDC_EDIT_sop = 1117
integer, parameter :: IDC_EDIT_soi = 1118
integer, parameter :: IDC_STATIC_ini = 1119
integer, parameter :: IDC_EDIT_ini = 1120
integer, parameter :: IDC_STATIC_ini1 = 1121
integer, parameter :: IDC_BUTTON_man = 1122
integer, parameter :: IDC_STATIC_cli = 1123
integer, parameter :: IDC_BUTTON_dep = 1124
integer, parameter :: IDC_BUTTON_red = 1125
integer, parameter :: IDC_BUTTON_lit = 1126
integer, parameter :: IDC_RADIO_single_ini = 1127
integer, parameter :: IDC_RADIO_multi_ini = 1128
integer, parameter :: IDC_STATIC_standid = 1129
integer, parameter :: IDC_EDIT_standid = 1130
integer, parameter :: IDC_STATIC_man = 1131
integer, parameter :: IDC_EDIT_man = 1132
integer, parameter :: IDC_STATIC_dep = 1133
integer, parameter :: IDC_EDIT_dep = 1134
integer, parameter :: IDC_EDIT_red = 1135
integer, parameter :: IDC_EDIT_lit = 1136
integer, parameter :: IDC_STATIC_lit = 1137
integer, parameter :: IDC_STATIC_red = 1138
integer, parameter :: IDC_STATIC_dir2 = 1139
integer, parameter :: IDC_STATIC_sop = 1140
integer, parameter :: IDC_EDIT_cli = 1141
integer, parameter :: IDC_BUTTON_cli = 1142
integer, parameter :: IDC_BUTTON_DIR = 1143
integer, parameter :: IDC_EDIT_cli2 = 1144
integer, parameter :: IDC_EDIT_DIR = 1144
integer, parameter :: IDC_EDIT_DIR_IN = 1144
integer, parameter :: IDC_STATIC_name = 1145
integer, parameter :: IDC_EDIT_DIR_OUT = 1145
integer, parameter :: IDC_EDIT_sitename = 1147
integer, parameter :: IDC_STATIC_nameall = 1148
integer, parameter :: IDC_RADIO_idy = 1149
integer, parameter :: IDC_RADIO_idn = 1150
integer, parameter :: IDC_STATIC_id = 1151
integer, parameter :: IDC_STATIC_year = 1152
integer, parameter :: IDC_STATIC_yearly = 1153
integer, parameter :: IDC_CHECK_y1 = 1161
integer, parameter :: IDC_CHECK_y2 = 1162
integer, parameter :: IDC_CHECK_y3 = 1163
integer, parameter :: IDC_CHECK_y4 = 1164
integer, parameter :: IDC_CHECK_y5 = 1165
integer, parameter :: IDC_CHECK_y6 = 1166
integer, parameter :: IDC_CHECK_y7 = 1167
integer, parameter :: IDC_CHECK_y8 = 1168
integer, parameter :: IDC_CHECK_y9 = 1169
integer, parameter :: IDC_CHECK_y10 = 1170
integer, parameter :: IDC_CHECK_y11 = 1171
integer, parameter :: IDC_CHECK_y12 = 1172
integer, parameter :: IDC_CHECK_y13 = 1173
integer, parameter :: IDC_CHECK_y14 = 1174
integer, parameter :: IDC_CHECK_y15 = 1175
integer, parameter :: IDC_CHECK_y16 = 1176
integer, parameter :: IDC_CHECK_y17 = 1177
integer, parameter :: IDC_CHECK_y18 = 1178
integer, parameter :: IDC_CHECK_y19 = 1179
integer, parameter :: IDC_CHECK_y20 = 1180
integer, parameter :: IDC_CHECK_y21 = 1181
integer, parameter :: IDC_CHECK_y22 = 1182
integer, parameter :: IDC_CHECK_y23 = 1183
integer, parameter :: IDC_CHECK_y24 = 1184
integer, parameter :: IDC_CHECK_y25 = 1185
integer, parameter :: IDC_CHECK_y26 = 1186
integer, parameter :: IDC_CHECK_y27 = 1187
integer, parameter :: IDC_CHECK_y28 = 1188
integer, parameter :: IDC_STATIC_yfile = 1189
integer, parameter :: IDC_BUTTON_yearly = 1190
integer, parameter :: IDC_CHECK_y29 = 1190
integer, parameter :: IDC_BUTTON_daily = 1191
integer, parameter :: IDC_CHECK_y30 = 1191
integer, parameter :: IDC_BUTTON_coh_yearly = 1192
integer, parameter :: IDC_CHECK_y31 = 1192
integer, parameter :: IDC_BUTTON_coh_daily = 1193
integer, parameter :: IDC_CHECK_y32 = 1193
integer, parameter :: IDC_STATIC_choice_out = 1194
integer, parameter :: IDC_CHECK_y33 = 1194
integer, parameter :: IDC_STATIC_daily = 1195
integer, parameter :: IDC_CHECK_y34 = 1195
integer, parameter :: IDC_COMBO_daily = 1196
integer, parameter :: IDC_CHECK_y35 = 1196
integer, parameter :: IDC_STATIC_coh_daily = 1197
integer, parameter :: IDC_CHECK_y36 = 1197
integer, parameter :: IDC_COMBO_coh_daily = 1198
integer, parameter :: IDC_CHECK_y37 = 1198
integer, parameter :: IDC_CHECK_y38 = 1199
integer, parameter :: IDC_CHECK_y39 = 1200
integer, parameter :: IDC_CHECK_y40 = 1201
integer, parameter :: IDC_CHECK_y41 = 1202
integer, parameter :: IDC_CHECK_y42 = 1203
integer, parameter :: IDC_COMBO_coh_yearly = 1204
integer, parameter :: IDC_STATIC_coh_yearly = 1205
integer, parameter :: IDC_STATIC_SUM = 1206
integer, parameter :: IDC_CHECK_y43 = 1206
integer, parameter :: ID4C_BUTTON_OK = 1208
integer, parameter :: ID_CTR_BUTTON_FLAGS = 1209
integer, parameter :: ID_CTR_BUTTON_OK = 1210
integer, parameter :: ID_FILES_BUTTON_OK = 1211
integer, parameter :: ID_CTR_BUTTON_FILES = 1212
integer, parameter :: ID_OUT_BUTTON_BACK = 1213
integer, parameter :: ID_START = 1214
integer, parameter :: ID_SAVE = 1215
integer, parameter :: ID_YEARLY_BUTTON_OK = 1216
integer, parameter :: ID_DAILY_BUTTON_OK = 1217
integer, parameter :: ID_YEARLYCOH_BUTTON_OK = 1218
integer, parameter :: ID_FLAGS_BUTTON_OK = 1219
integer, parameter :: ID_DAILYCOH_BUTTON_OK = 1220
integer, parameter :: ID_CTR_BUTTON_RUNNR = 1221
integer, parameter :: ID_DEFAULT_DIR_BUTTON_OK = 1222
integer, parameter :: ID_START_4C = 1226
integer, parameter :: IDSTOP = 1227
integer, parameter :: IDC_RADIO_start = 1229
integer, parameter :: IDC_RADIO_start_dir = 1230
integer, parameter :: IDC_RADIO_edit = 1231
integer, parameter :: ID_CANCEL_FLAGS = 1232
integer, parameter :: IDC_EDIT_ID = 1233
integer, parameter :: ID_CANCEL_FILES = 1233
integer, parameter :: IDC_COMBO_standid = 1234
integer, parameter :: ID_CANCEL_IDS = 1234
integer, parameter :: IDC_STATIC_spinup = 1235
integer, parameter :: IDC_EDIT_spinup = 1236
integer, parameter :: IDC_EDIT_wpm = 1236
integer, parameter :: ID_CANCEL_OUTF = 1236
integer, parameter :: IDC_BUTTON_spinup = 1237
integer, parameter :: IDC_STATIC_mes = 1237
integer, parameter :: ID_CTR_BUTTON_IDS = 1238
integer, parameter :: IDC_EDIT_mes = 1238
integer, parameter :: IDC_COMBO_yearly = 1239
integer, parameter :: IDC_COMBO_sum = 1240
integer, parameter :: ID_IDS_BUTTON_OK = 1242
integer, parameter :: ID_YEARLY_BUTTON_SELECT = 1248
integer, parameter :: ID_YEARLY_BUTTON_DESELECT = 1249
integer, parameter :: IDC_BUTTON_wpm = 1250
integer, parameter :: ID_DAILY_BUTTON_SELECT = 1250
integer, parameter :: IDC_BUTTON_mes = 1251
integer, parameter :: ID_DAILY_BUTTON_DESELECT = 1251
integer, parameter :: ID_DAILYCOH_BUTTON_SELECT = 1252
integer, parameter :: ID_DAILYCOH_BUTTON_DESELECT = 1253
integer, parameter :: ID_YEARLYCOH_BUTTON_SELECT = 1254
integer, parameter :: ID_YEARLYCOH_BUTTON_DESELECT = 1255
integer, parameter :: IDC_CHECK_y44 = 1256
integer, parameter :: IDC_STATIC_CO2 = 1256
integer, parameter :: IDC_CHECK_y45 = 1257
integer, parameter :: IDC_CHECK_y46 = 1258
integer, parameter :: IDC_CHECK_y47 = 1259
integer, parameter :: IDC_CHECK_y48 = 1260
integer, parameter :: IDC_CHECK_y49 = 1261
integer, parameter :: IDC_REBAR1 = 1262
integer, parameter :: IDC_CHECK_y50 = 1001
integer, parameter :: IDC_CHECK_y51 = 1002